Loading A Song (Load) - Roland JUNO-G Owner's Manual

6.
Press either [F3 (FMT 0)] or [F4 (FMT 1)] to select the format
for saving.
• FMT 0 (Format 0):
Convert the song to a Format 0 Standard MIDI File (all
performance data is saved in one phrase track) and save it to
disk. An extension of ".MID" will be added automatically.
• FMT 1 (Format 1):
Convert the song to a Format 1 Standard MIDI File
(performance data is saved in more than one phrase track) and
save it to disk. An extension of ".MID" will be added
automatically.
7.
Press [F6 (SAVE)].
A message will ask for confirmation.
8.
Press [F6 (EXEC)] to execute.
* To cancel, press [F5 (CANCEL)].
The filename extension will be ".MID" whether you select "Save
SMF (Format 0)" or "Save SMF (Format 1)." The two cannot be
distinguished in this way.
When you save data in SMF format, the sound setup data will
not be saved. In order to ensure that the correct sounds are
played, you must record the appropriate bank select and
program numbers.
The audio track data is not saved when you save the song in
SMF format.
If you assign a file name that is identical to a file name already
existing in the user area or memory card, and attempt to save, a
message of "File "****" Already Exists! Overwrite Sure?" will
appear, asking you for confirmation. If it is OK to overwrite the
existing file, press [F6 (EXEC)]. If you decide to cancel the Save
operation, press [F5 (CANCEL)].
If you attempt to save data on a memory that was not formatted
by the JUNO-G, a message of "Unformatted!" (memory card
has not been formatted) will appear. Please format the memory
card on the JUNO-G (p. 164).
Saving/Loading a Song (Save/Load)

Loading a Song (Load)

Basic Procedure
1.
Hold down [SHIFT] and press [WRITE].
The SAVE/LOAD MENU screen appears.
2.
Press [F4 (4)]–[F6 (6)] to select the format in which you want
to load the song.
• 4. Load Song+Smpls:
Loads a song into Temporary Area. All samples will be loaded
into sample memory.
• 5. Load Song:
Loads a song into Temporary Area.
• 6. Load all Samples:
Loads all samples into sample memory.
Function Button
Load Song+Smpls
Load Song
Load all Samples
✔: Loading is possible
* A song saved on the JUNO-G (.SVQ) also includes the data for the
sound generator's temporary area.
Loading a Song with Samples
(Load Song+Smpls)
Here's how you can load a song into Temporary Area and all
samples into sample memory.
1.
From the SAVE/LOAD MENU screen, press [F4 (4)].
The SONG LIST screen appears.
* Alternatively, press EDIT [SONG] to access the SONG LIST screen.
This button is pressed to toggle between the SONG LIST screen and
the MIDI TRACK screen.
* By pressing [ ] [ ] in the above screen, you can specify the type of
songs that will be displayed. If various types of songs are saved
together, it will be easier to find the desired song if you restrict the
displayed file types in this way.
ALL: all songs will be displayed
SVQ: Only the SVQ song files are displayed
SMF: only Standard MIDI Files will be displayed
2.
Press either [F1 (USER)] (User memory) or [F2 (CARD)]
(Memory card) to select the load-destination, and use [
[ ] to select a song.
Song ALL Samples
✔ ✔
[F4]
✔
[F5] –
✔
[F6] –
]
115