Roland JUNO-G Owner's Manual page 41

LPF
Level
High
Frequency
Cutoff frequency
Low
Parameter Value
Cutoff V-Curve FIX, 1–7
Cutoff V-Sens -63– +63
Resonance V-Sens -63– +63
F-Env V-Curve FIX, 1–7
F-Env V-Sens -63– +63
F-Env T1 V-Sens -63– +63
F-Env T4 V-Sens -63– +63
TVF ENVELOPE
Parameter Value
F-Env Depth -63– +63
F-Env Time KF -100– +100
(Time Keyfollow)
F-Env Time 1–4 ★
0–127
F-Env Level 0–4 0–127
Resonance
BPF HPF
Explanation
Curve that determines how keyboard playing dynamics (velocity) will affect the cutoff frequency
Set this to "FIX" if you don't want the Cutoff frequency to be affected by the keyboard velocity.
1 2
Use this parameter when changing the cutoff frequency to be applied as a result of changes in playing velocity. If you want
strongly played notes to raise the cutoff frequency, set this parameter to positive (+) settings.
This allows keyboard velocity to modify the amount of Resonance.
If you want strongly played notes to have a greater Resonance effect, set this parameter to positive (+) settings.
Curve that determines how keyboard playing dynamics (velocity) will affect the TVF envelope
Set this to "FIX" if you don't want the TVF Envelope to be affected by the keyboard velocity.
1 2
Specifies how keyboard playing dynamics will affect the depth of the TVF envelope.
Positive (+) settings will cause the TVF envelope to have a greater effect for strongly played notes, and negative (-) set-
tings will cause the effect to be less.
This allows keyboard dynamics to affect the T1 of the TVF envelope.
If you want T1 to be speeded up for strongly played notes, set this parameter to a positive (+) value.
Use this parameter when you want key release speed to affect the T4 value of the TVF envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+) value.
Explanation
Depth of the TVF envelope
Higher settings will cause the TVF envelope to produce greater change. Negative (-) settings will invert the shape of the
envelope.
Use this setting if you want the TVF envelope times (T2–T4) to be affected by the keyboard location.
Based on the TVF envelope times for the C4 key (center C), positive (+) settings will cause notes higher than C4 to have
increasingly shorter times.
TVF envelope times (T1–T4)
Higher settings will lengthen the time until the next cutoff frequency level is reached.
TVF envelope levels (L0–L4)
Specify how the cutoff frequency will change at each point, relative to the Cutoff Frequency value.
Cutoff frequency
(Octave)
PKG
+2
+1
o
-1
-2
C1
3 4 5
3 4 5
Parameter marked with a "★" can be controlled using specified MIDI messages
Creating a Patch
Cutoff Keyfollow
+200
-200
C2 C3 C4 C5 C6
6 7
6 7
+100
+50
0
-50
-100
C7
Key
(Matrix Control, p. 44)
41