Roland JUNO-G Owner's Manual page 43

Pan Keyfollow
Pan
R
o
L
C1 C2 C3
Parameter Value
Random Pan Depth 0–63
Alter Pan Depth L63–0–63R
TVA ENVELOPE
Parameter Value
A-Env T1 V-Sens -63– +63
A-Env T4 V-Sens -63– +63
A-Env Time KF -100– +100
(Time Keyfollow)
A-Env Time 1–4 ★
0–127
A-Env Level 1–3 0–127
TVA Envelope
T1 T2 T3
Level
L1 L2
Note on
+100
+50
0
-50
-100
C4 C5 C6 C7
Explanation
Use this parameter when you want the stereo location to change randomly each time you press a key.
Higher settings will produce a greater amount of change.
This setting causes panning to be alternated between left and right each time a key is pressed.
Higher settings will produce a greater amount of change. "L" or "R" settings will reverse the order in which the pan
will alternate between left and right. For example if two tones are set to "L" and "R" respectively, the panning of the
two tones will alternate each time they are played.
* When any value from Type "2"–"10" is selected for the Structure parameter in the Pan KF, Rnd Pan Depth, Alter Pan Depth
parameter settings, the output of tones 1 and 2 are joined in tone 2, and the output of tones 3 and 4 are joined in tone 4. For this
reason, tone 1 will follow the settings of tone 2, and tone 3 will follow the settings of tone 4 (p. 35).
Explanation
This allows keyboard dynamics to affect the T1 of the TVA envelope.
If you want Time 1 to be speeded up for strongly played notes, set this parameter to a positive (+) value. If you
want it to be slowed down, set this to a negative (-) value.
Use this parameter when you want key release speed to affect the T4 value of the TVA envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+) value. If you
want it to be slowed down, set this to a negative (-) value.
Use this setting if you want the TVA envelope times (T2–T4) to be affected by the keyboard location. Based on
the TVA envelope times for the C4 key (center C), positive (+) settings will cause notes higher than C4 to have
increasingly shorter times, and negative (-) settings will cause them to have increasingly longer times. Larger set-
tings will produce greater change.
TVA envelope times (T1–T4)
Higher settings will lengthen the time until the next volume level is reached.
TVA envelope levels (L1–L3)
Specify how the volume will change at each point, relative to the Tone Level value.
T4
L3
Note off
Key
Parameter marked with a "★" can be controlled using specified MIDI messages
Time Keyfollow
Time
Time
C1 C2 C3
Creating a Patch
(Matrix Control, p. 44)
-100
-50
0
+50
+100
C4 C5 C6 C7
Key
43