Channel Mode Messages - Roland JUNO-G Owner's Manual

3. Data Reception (Sequencer Section)
3.1 Messages recorded during recording
■Channel Voice Messages
●Note Off
Status 2nd byte
8nH kkH
9nH kkH
n=MIDI channel number:
kk=note number:
vv=note off velocity:
* Not received when the Note parameter (Recording Select window) is OFF.
●Note on
Status 2nd byte
9nH kkH
n=MIDI channel number:
kk=note number:
vv=note on velocity:
* Not received when the Note parameter (Recording Select window) is OFF.
●Polyphonic Aftertouch
Status 2nd byte
AnH kkH
n=MIDI channel number:
kk=note number:
vv=Polyphonic Aftertouch:
* Not received when the Poly Afertouch parameter (Recording Select window) is OFF.
●Control Change
Status 2nd byte
BnH kkH
n=MIDI channel number:
kk=Control number:
vv=value:
* Not received when the Control Change parameter (Recording Select window) is OFF.
●Program Change
Status 2nd byte
CnH ppH
n=MIDI channel number:
pp=Program number:
* Not received when the Program Change parameter (Recording Select window) is OFF.
●Channel Aftertouch
Status 2nd byte
DnH vvH
n=MIDI channel number:
vv=Channel Aftertouch:
* Not received when the Channel Aftertouch parameter (Recording Select window) is
OFF.
●Pitch Bend Change
Status 2nd byte
EnH llH
n=MIDI channel number:
mm, ll=Pitch Bend value:
* Not received when the Pitch Bend parameter (Recording Select window) is OFF.
3rd byte
vvH
00H
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
01H - 7FH (1 - 127)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 78H (0 - 120)
00H - 7FH (0 - 127)
0H - FH (ch.1 - ch.16)
00H - 7FH (prog.1 - prog.128)
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
3rd byte
mmH
0H - FH (ch.1 - ch.16)
00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)

■Channel Mode messages

●All Sound Off (Controller number 120)
Status 2nd byte
BnH 78H
n=MIDI channel number:
●Reset All Controller (Controller number 121)
Status 2nd byte
BnH 79H
n=MIDI channel number:
●Omni Off (Controller number 124)
Status 2nd byte
BnH 7CH
n=MIDI channel number:
* The same processing will be done as when an All Note Off message is received.
●Omni On (Controller number 125)
Status 2nd byte
BnH 7DH
n=MIDI channel number:
* The same processing will be done as when an All Note Off message is received.
●Mono (Controller number 126)
Status 2nd byte
BnH 7EH
n=MIDI channel number:
mm=mono number:
* The same processing will be done as when an All Note Off message is received.
●Poly (Controller number 127)
Status 2nd byte
BnH 7FH
n=MIDI channel number:
* The same processing will be done as when an All Note Off message is received.
■System Exclusive Messages
Status Data byte
F0H iiH, ddH, ......, eeH
F0H: System Exclusive message status
ii=ID number: This is the ID number (manufacturer ID) that specifies the
manufacturer whose exclusive message this is. Roland's manufacturer
ID is 41H. ID numbers 7EH and 7FH are defined in an expansion of
the MIDI standard as Universal Non-real-time messages (7EH) and
Universal Realtime Messages (7FH).
dd,..., ee = data: 00H - 7FH (0 - 127)
F7H: EOX (End of System Exclusive)
* Not received when the System Exclusive parameter (Recording Select window) is OFF.
* MIDI Machine Control and MIDI Time code is not recorded. (Refer to "1.3 Messages
acknowledged for synchronization")
MIDI Implementation
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
mmH
0H - FH (ch.1 - ch.16)
00H - 10H (0 - 16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
Status
F7H
219