Selecting The Midi Transmit Channel - Roland Music ATELIER AT500 Owner's Manual

* When the pedal part button is ON, data received at the MIDI In
connector will control the pedal part of keyboard sound
generator. When the pedal part button is OFF, data received at
the MIDI In connector will control the GS sound generator.
4.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.

Selecting the MIDI Transmit Channel

When you use the MIDI connectors or the USB connector of
the ATELIER to transmit musical data to external devices, for
each keyboard (Upper, Lower, and Pedal) you can specify the
channel on which your playing will be transmitted as MIDI
messages.
For details refer to "Connecting MIDI Devices" (p. 231).
1.
Touch <System> on the Main screen.
The System screen appears.
fig.09-24.eps
fig.09-30.eps
fig.10-11.eps
2.
Touch the part to change the MIDI Transmit
Channel.
Menu
Tx MIDI Ch. Upper
Upper
Tx MIDI Ch. Lower Lower
Tx MIDI Ch. Pedal Pedal
Tx MIDI Ch. Solo Solo
Tx MIDI Ch. Drums
Drums/SFX
Tx MIDI Ch. M.Perc Manual Percussion
Tx MIDI Ch. Ctrl Control
The Control part transmits Expression pedal data and PC
numbers.
3.
Touch < > < > to change the setting.
fig.09-31-a.eps
Setting
1–16
4.
Touch <Exit>.
MIDI messages for the Solo part will be transmitted only
NOTE
when the Solo [To Lower] button is ON.
Various Other Settings
Part
213