Roland Music ATELIER AT500 Owner's Manual page 170

Recording/Playing Back What You Play
3.
Touch <Save/Delete>.
The Song Save/Song Delete screen appears.
fig.07-23.eps
4.
Touch < > (Utility).
The Utility screen appears.
fig.07-24.eps
5.
Touch <Rename>.
The Rename screen appears.
fig.07-25.eps
6.
Touch the character select button (
to switch among uppercase/lowercase/
symbols.
Touch the character select button repeatedly to cycle
through the available choices, like this: uppercase →
lowercase → symbols → uppercase...
168
7.
Touch the screen to specify the desired
character.
The following characters can be selected.
A B C D E F G H I J K L M N O P Q R S T U
Uppercase
V W X Y Z
Lowercase a b c d e f g h i j k l m n o p q r s t u v w x y z
! " # % & ' ( ) * + , - . / : = ? ^ _ 0 1 2 3 4
Symbols
5 6 7 8 9
Deletes a character.
Inserts a space (blank).
Move the cursor (the symbol that indicates the
location at which characters will be input) to
left or right.
To cancel operation, touch <Cancel>.
8.
When you're done making the settings, touch
<OK>.
The new name is now inserted.
fig.07-26.eps
You cannot directly change or edit the name of a
performance song stored on a USB memory or floppy disk.
NOTE The song must first be loaded (p. 170) into the instrument,
edited, and then saved to USB memory or floppy disk
again.
You can also access the Rename screen as
)
follows.
1.
Touch <
The Utility screen appears.
2.
In the Utility screen, touch <Edit>.
The Edit Menu screen appears.
3.
Touch <Rename> on the Edit Menu screen.
The Rename screen appears.
> (Utility) on the Rec/Play screen.