Changing The Sound Of The Metronome; Setting The Beat - Roland Music ATELIER AT500 Owner's Manual

Various Other Settings

Changing the Sound of the Metronome

You can choose one of 4 different sounds for the metronome.
1.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
2.
Touch < > (Utility).
The Utility screen appears.
3.
Touch <Options>.
The Rec/Play Options screen appears.
4.
Touch < > < > to display the Metronome
Sound.
fig.09-19.eps
5.
Touch the Metronome Sound setting.
fig.09-21.eps
6.
Touch < > <
Setting
CLICK&BELL Conventional metronome sound
ELECTRONIC Electronic metronome sound
VOICE ENG. Human voice (English)
VOICE JPN.
Human voice (Japanese)
7.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
208
> to change the setting.
Description

Setting the Beat

This setting determines the beat to be used when recording
performance songs.
1.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
2.
Touch < > (Utility).
The Utility screen appears.
3.
Touch <Options>.
The Rec/Play Options screen appears.
4.
Touch < > < > to display the Beat.
fig.09-19.eps
5.
Touch the Beat setting.
The time signature setting screen appears.
fig.09-19-2.eps
6.
Touch the time signature that you wish to set.
7.
Touch <Exit>.
If you're using Rhythm performance or Automatic
Accompaniment, the time signature will be specified
automatically.
You cannot change the beat of previously recorded songs.
NOTE