Roland Music ATELIER AT500 Owner's Manual page 223

6.
Touch <BMP Installer>.
The BMP Installer screen appears.
fig.09-34.eps
Display
Images stored in internal memory
01–03 For numbers at which no image is saved,
"(Blank)" is shown.
The image stored in the ATELIER will be shown
View for a few seconds, allowing you to check the
image.
Load an image from external media into internal
Load...
memory.
Clear... Delete an image from internal memory.
The ATELIER can store up to three images. If two or more
images are stored in internal memory, those images will be
displayed consecutively after the power is turned on.
7.
In the screen, touch <01>–<03> to select the
destination at which the image is to be saved.
fig.09-35.eps
8.
Touch <Load...>.
The following screen appears.
fig.09-36.eps
Description
9.
Touch < > < > to select the media.
Choose "Ext Memory" to load an image from USB
memory, or choose "Disk" to load an image from floppy
disk.
The destination will show the names of the images saved
on the external media.
10.
Touch < > < > to select the image that you
want to load into internal memory.
You can touch <View> to verify the image.
11.
Touch <OK>.
The image will be loaded.
If an image is already stored at the load destination, the
NOTE
following screen will appear.
fig.09-37.eps
To erase the currently loaded image,
and load the new image
1.
Touch <OK>.
To cancel image loading
1.
Touch <Cancel>.
If the image cannot be loaded, the following screen will
NOTE
appear.
fig.09-38.eps
Various Other Settings
221