Using The Code Hook; Restoring All The Factory Default Settings - Roland Music ATELIER AT500 Owner's Manual

Before You Start Playing
Using the Cord Hook
If you're using headphones or a microphone, you can use the
cord hook to neatly bundle the cables near your feet.
Attaching the Cord Hook
1.
Screw the cord hook (with wing nut) about
80% of the way into the screw hole located at
the bottom left of the organ.
2.
After you've oriented the hook as desired, use
the wing nut to fasten it.
Screw Hole
Wing Nut
Cord Hook
24
Restoring All the Factory
Default Settings
You can restore all of the settings stored in the ATELIER to what
they were when the instrument shipped from the factory. This
function is called "Factory Reset."
1.
Touch <System> on the Main screen.
The System screen appears.
fig.00-37.eps
2.
In the System screen, touch <Utility> to open
the Utility screen.
fig.00-38.eps
3.
In the Utility screen, touch <Factory Reset>.
fig.00-39.eps