Copying Data From A Floppy Disk To Usb Memory - Roland Music ATELIER AT500 Owner's Manual

Copying Data from a Floppy
Disk to USB Memory
All songs and Registration data saved on a floppy disk can be
copied to USB memory.
Rhythms and image data cannot be copied.
NOTE
Songs and Registrations inside folders will not be copied. If
you want to copy this data, move the song or Registration
NOTE
data out of the folder.
1.
Make preparations for the copy.
Connect the floppy disk drive to the Ext Memory
connector. Into the floppy disk drive, insert the floppy
disk containing the data you want to copy.
Connect your USB memory to the External Memory
connector.
2.
Touch <System> on the Main screen.
The System screen appears.
3.
In the System screen, touch <Utility>.
fig.00-38.eps
4.
Touch <DiskToExtMem>.
The following screen appears.
If you decide to stop the data copy operation, touch
<Cancel>.
5.
Touch <OK>.
A screen like the one below appears, allowing you to
specify a name for the folder.
If you're copying all songs and Registrations to USB
memory, a folder will be created in the USB memory,
and the data will be saved in this folder.
6.
Touch the character select button (
to switch among uppercase/numbers.
Touch the character select button repeatedly to cycle
through the available choices, like this: uppercase →
numbers → uppercase...
7.
Touch the screen to specify the desired
character.
The following characters can be selected.
A B C D E F G H I J K L M N O P Q R S T U
Uppercase
V W X Y Z
Symbols _ 0 1 2 3 4 5 6 7 8 9
Deletes a character.
Move the cursor (the symbol that indicates
the location at which characters will be
input) to left or right.
To cancel the operation, touch <Cancel>.
8.
When you're done making the settings, touch
<OK>.
The folder name has been assigned.
The following screen appears.
Various Other Settings
)
223