Troubleshooting - Roland Music ATELIER AT500 Owner's Manual

Troubleshooting

If the ATELIER does not function in the way you except, first check the following chart. If this does not resolve the problem,
consult your dealer or a nearby Roland Service Station.
Power does not Turn On
Problem
When you press the [Power On]
switch, the power doesn't come on
Problems with the Screen Display
Problem
Nothing appears on screen
It appears as though there are
vertical stripes in the screen
Can't view the main screen
Bouncing Ball is not shown
Lyrics are not indicated properly
in the display
Notation is not indicated properly
in the display
Check
Power cord is not connected correctly.
Check
The ATELIER uses a liquid-crystal
screen, so text may not be displayed
when the ambient temperature is
below freezing.
This is due to the nature of a liquid
crystal display, and is not a
malfunction.
The [Video Monitor] button is lit.
The Bouncing Ball display is turned off.
With some music files, the lyrics cannot
be displayed correctly.
In the Notation screen, some lyrics or
notes could extend beyond the edges
of the screen, and not be displayed.
A button was pressed while the lyrics
were being shown in the display.
During the display of lyrics, you could
be taken to a different screen if you
press a button.
In the Notation screen, some lyrics or
notes could extend beyond the edges
of the screen, and not be displayed.
The Notation display feature is
particularly unsuitable for the display
of difficult, complex musical works that
demand accurate notation.
If you select a part that does not
contain performance data, notes will
not be displayed in the notation.
Solution
Connect the power cord correctly.
Solution
This is not a malfunction.
This is not a malfunction.
If the [Video Monitor] button is lit, the
ATELIER's display will show the same
image as the device connected to the
ATELIER. Press the [Video Monitor] button
so it's turned off.
Turn the Main Bouncing Ball setting ON.
This is not a malfunction.
This is not a malfunction.
If you want to have the lyrics be displayed
again, touch <Play> on the Rec/Play
screen.
This is not a malfunction.
This is not a malfunction.
Change the part that is displayed.
Page
p. 21
Page
- - -
- - -
p. 237
p. 214
- - -
- - -
p. 206
- - -
p. 162
p. 161
241