Selecting The Midi Transmit Channel - Roland Music Atelier AT-45 Owner's Manual

Chapter 10 Various Other Settings
* When the pedal part button is ON, data received at the MIDI
In connector will control the pedal part of keyboard sound
generator. When the pedal part button is OFF, data received at
the MIDI In connector will control the GS sound generator.
4.
Touch <Exit>.
There are limitations on the types of MIDI messages that can
be received by the keyboard sound source. For details refer
to the "MIDI IMPLEMENTATION" (sold separately).
This setting remains stored in memory even while power is
turned off.
■ Selecting the MIDI Transmit
Channel
When you use the MIDI connectors of the AT-45 to transmit
musical data to external devices, for each keyboard (Upper,
Lower, and Pedal) you can specify the channel on which
your playing will be transmitted as MIDI messages.
For details refer to p. 186.
1.
Touch <System> on the Main screen.
The System screen appears.
180
2.
Touch <Tx MIDI Ch. Upper>, <Tx MIDI Ch.
Lower>, <Tx MIDI Ch. Pedal>, <Tx MIDI Ch.
Solo>, <Tx MIDI Ch. Drums> (Tx MIDI Ch.
Drums/SFX) or <Tx MIDI Ch. Cntrl> (Tx MIDI
Ch. Control).
The Control part transmits Expression pedal data and
PC numbers.
3.
Touch < >< > to change the setting.
Channel 1–16
4.
Touch <Exit>.
NOTE
MIDI messages for the Solo part will be transmitted only
when the Solo [To Lower] button is ON.