Midi In Mode; Selecting The Midi Transmit Channel - Roland Atelier AT-90SL Owner's Manual

Max Max Max Max
Min Min Min Min

■ MIDI IN Mode

This instrument contains two sound generators: one for
GM2/GS data playback and one for keyboard performance.
Normally, data received at the MIDI In connector will control
only the sound generator for GM2/GS data playback.
However by changing the MIDI IN Mode setting, you can
also control the keyboard sound generator from MIDI In.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the MIDI IN Mode.
3.
Touch the MIDI IN Mode setting to switch
between "MODE 1" and "MODE 2."
Each time you touch the MIDI IN Mode setting, it will
alternate between "Mode 1" and "Mode 2."
Control the instrument as a GS sound
MODE 1
generator
Channels 5 through 10 and Channels 12, 14,
15 are transmitted to the GS sound
MODE 2 generator, and all other channels are
transmitted to the keyboard sound
generator.
Channel MODE 1
1 GS
2 GS
3 GS
4 GS
5–10 GS
11 GS
12 GS
13 GS
14–15 GS
16 GS
Harmony Intelligence
MODE 2
Solo
Pedal/GS *
Lower
Upper
GS
Drum/SFX
GS
Manual Percussion
GS
Control
Chapter 10 Various Other Settings
* When the pedal part button is ON, data received at the MIDI
In connector will control the pedal part of keyboard sound
generator. When the pedal part button is OFF, data received at
the MIDI In connector will control the GS sound generator.
4.
Touch <Exit>.
There are limitations on the types of MIDI messages that can
be received by the keyboard sound source. For details refer
to the "MIDI IMPLEMENTATION" (sold separately).
This setting remains stored in memory even while power is
turned off.
■ Selecting the MIDI Transmit
Channel
When you use the MIDI connectors or the computer
connector of the AT-90SL to transmit musical data to external
devices, for each keyboard (Upper, Lower, and Pedal) you
can specify the channel on which your playing will be
transmitted as MIDI messages.
For details refer to p. 208.
1.
Touch <System> on the Main screen.
The System screen appears.
197