Roland Music ATELIER AT500 Owner's Manual page 248

Troubleshooting
Song does not Play Correctly
Problem
The volume changes during
playback of performance data
Certain instrument are not heard
while playing a song
-
Recording is not Possible
Problem
Recording is not possible
(If you wish to erase a previously-
recorded track and then re-
record.)
The recorded performance has
disappeared
-
Problems with Playback Functions
Problem
Moving your hand over the D
Beam controller does not produce
a sound
Expression Pedal does not
operate
Can't use the function assigned to
the foot switch
246
Check
When recording is performed
repeatedly while changing the Part
Balance volume, the previously-
recorded Part Balance data remains in
the Control track.
The track is muted.
Check
Press the track button for the desired
track to make that button blink before
you begin recording.
Touch the track button for the track you
want to record in the Rec/Play screen,
stopping the button from flashing.
Any performance that has been
recorded is deleted when the power to
the unit is turned off.
Check
If a D Beam button is lit in red, moving
your hand above the D Beam controller
will apply an effect to the sound you
play from the keyboard.
The function of the Expression Pedal
during recording or the function during
playback has been set to
"COMPOSER."
If "Registration Shift" (change
Registrations) is "RIGHT," "LEFT," or
"RIGHT + Load Next," the foot switch
will be dedicated to switching the
Registration.
Solution
If you wish to get rid of the volume
changes, use the Erase function to delete
the Part Balance data.
Turn off track muting.
Solution
Press the track button for the desired track
to make that button indicator blink before
you begin recording.
On Rec/Play screen, touch the track
button for the desired track to make that
button indicator blink before you begin
recording.
It is not possible to recover performance
data that has been lost.
Before you turn off the power, save the
performance data in the Favorites (user
memory), USB memory, or a floppy disk.
Solution
Press the D Beam button once again so
the button is lit in green.
Set the expression pedal function during
recording to "PEDAL," and during
playback to "PEDAL" or
"PEDAL+COMPOSER."
Set "Registration Shift" to "OFF."
Page
p. 182
p. 157
p. 159
Page
p. 166
p. 166
p. 169
Page
p. 142
p. 199
p. 122