Host Interface Menu; Changing The Host Interface Menu - Ricoh 220-240 V Software Manual

Host Interface Menu

You can set configurations about network connections and communication
when using parallel connection between the printer and the computer. The
changed configuration holds even if the printer is turned off.

Changing the Host Interface menu

Follow the procedure below to change the I/O Timeout.
A
Press the {Menu} key.
The menu screen appears.
B
Press the {U} or {T} key to display [Host Interface], and then press the {OK}
key.
C
Press the {U} or {T} key to display [I/O Timeout], and then press the {OK}
key.
D
Press the {U} or {T} key to select the lead time needed to end a printing op-
eration, and then press the {OK} key.
Wait one second. The [Host Interface] menu appears.
E
Press the {Menu} key.
The initial screen appears.
K C M Y
AQC001S
Host Interface Menu
183
5