Table of Contents
Advertisement
Preparing for Printing
Installing the PostScript 3 Printer Driver (Windows 2000 - IPP)
Important
1
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒ IPv6 cannot be used under Windows 2000.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer attached to this computer], and then click [Next >].
G
Click [Create a new port:].
H
Click [DeskTopBinder-SmartDeviceMonitor], and then click [Next >].
I
Click [IPP].
J
In the [Printer URL] box, enter "http://(printer's address)/printer" as the print-
er's address.
If the server authentification is issued, to enable SSL (a protocol for encrypted
communication), enter "https://(printer's address)/printer" (Internet Ex-
plorer 5.01, or a higher version must be installed).
(example IPv4 address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://(printer's address)/ipp" as the printer's address.
K
Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the name of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box be-
comes the IPP port name.
L
Click [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
M
Click [OK].
22
Advertisement
Table of Contents
