Ricoh 220-240 V Software Manual page 280

Monitoring and Configuring the Printer
DHCP server not found.
dhcpcd start.
dpsd is disabled.
Duplicate IP=<IP address>(from<MAC ad-
dress>).
Established SPX Connection with PServer,
(RPSocket=<socketnumber>, connID=<con-
nection ID>)
exiting
Exit pserver
6
Frametype =<frame typename>
httpd start.
IEEE 802.11b <communication mode> mode
inetd start.
Interface (interface name): Duplicate IP Ad-
dress (IP address).
< Interface > started with IP: < IP address >
< Interface >: Subnet overlap.
IPP cancel-job: permission denied.
IPP job canceled. jobid=%d.
LeaseTime=<lease time>(sec), Renew-
Time=<renewtime>(sec).
Login to fileserver <file server name>
(<IPX|IPv4|IPv6>,<NDS|BINDERY>)
Memory allocate error.
270
Message Problem and solutions
The DHCP server was not found. Make sure
that the DHCP is on the network.
The DHCPCD service (dhcp client service) has
started.
Communication via PictBridge is unavailable
because PictBridge is disabled in the security
mode. Enable PictBridge in the security mode.
The same IP address (IPv4, or IPv6 address)
was used. Each IP address (IPv4, or IPv6 ad-
dress) must be unique. Check the address of
the device indicated in [MAC address].
(In the remote printer mode) Connection to the
print server has been established.
The lpd service has ended and the system is
exiting the process.
(In the print server mode) The print server
function is disabled because the necessary
print server settings have not been made.
The frame type name is configured to be used
on NetWare.
The httpd service has started.
Displays IEEE 802.11b communication mode.
The inetd service has started.
The same IP (IPv4 or IPv6) address was used.
Each IP address must be unique. Check the ad-
dress of the device indicated in [IP address].
IP address (IPv4, or IPv4 address) has been set
for the interface and is operating.
The same IP address (IPv, orIPv6 address) and
the subnet mask is used with other device.
The printer could not authenticate the name of
the user attempting to cancel a job.
The spooled job was canceled due to error or
user request.
The resource lease time received from the
DHCP server is displayed in [lease time] in
seconds. The renewal time is displayed in [re-
new time] in seconds.
(In the print server mode)Login to the file serv-
er is in the NDS or BINDERY mode.
Data cannot be obtained.
Disconnect the USB cable, and then connect it.