Table of Contents
Advertisement
Preparing for Printing
K
Click [Network Printer], and then click [OK].
L
Double-click the computer name you want to use as a print server in the
[Browse for Printer] window.
1
M
Select the printer you want to use, and then click [OK].
N
Check that the port of the selected printer is displayed in [Port:].
O
Configure the [User Code] as necessary.
For an RPCS printer driver, a User Code can be set after the printer driver in-
stallation. For information about User Code, see the printer driver Help.
P
Select the [Default Printer] check box to configure the printer as default.
Q
Click [Continue].
The printer driver installation starts.
R
After the installation is completed, select one of the options to restart the
computer either now or later, and then click [Finish].
Restart the computer to complete installation.
Note
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.61 "If a
Message Appears during Installation".
42
Advertisement
Table of Contents
