Table of Contents
Advertisement
Other Print Operations
Printing a Stored Print File
The following procedure describes how to print a Stored Print file with the PCL
6/5c, RPCS and Postscript 3 printer driver. For information about how to print
a Stored Print file with the PostScript 3 printer driver, see Supplement included.
Important
❒ Applications with their own drivers, such as PageMaker, do not support this
function.
A
Configure Stored Print in the printer driver's properties.
3
You can select two ways for Stored Print:
• [Stored Print]
Stores the file in the printer and print it later using the control panel.
• [Store and Normal Print] (or [Store and Print])
Prints the file at once and also stores the file in the printer.
For details about configuring the printer drivers, see the relevant Help files.
B
Click [Details...], and then enter a User ID in the [User ID:] box.
You can also set a password. The same password must be entered when print-
ing or deleting.
You can set a file name. The file name you set will be displayed on the print-
er's Job List screen.
C
Start printing from the application's [Print] dialog box.
The Stored Print job is sent to the printer and stored.
D
On the printer's control panel, press [Prt.Jobs].
E
Select [Stored Print Jobs] using the {U} or {T} key, and then press [Job List].
A list of Stored Print files stored in the printer appears.
You can print files also by pressing [User ID].
116
Advertisement
Table of Contents
