Mira Vision Dual Installation Manual page 31

Insert fixing screws through holes
in wall brackets and fix to wall. Do
not fully tighten at this stage. Use
template to set correct distances
between wall brackets. Fully tighten
screws.
Note! Slots in wall brackets allow for
adjustment. Use one horizontal slot
and one vertical slot.
Make sure that holes for Slide Bar
Securing Screws are positioned
correctly, as shown.
Position slide bar over wall brackets
and secure with screws. (Do not
overtighten.)
Fit Slide Bar End Caps into top and
bottom of Slide Bar Assembly. Push
and twist caps until they "click" and
lock in place.
31