Mira Vision Dual Installation Manual page 25

Drill and plug Slide Bar Assembly
fixing holes.
Insert fixing screws through holes
in Wall Brackets and fix to wall. Do
not fully tighten. Use template to
set correct distances between Wall
Brackets. Fully tighten screws. Use
longer fixing screws if using spacers
supplied.
Note! Slots in Wall Brackets allow
for adjustment. Use one horizontal
slot and one vertical slot.
Make sure that holes for Slide Bar
Securing Screws are positioned
correctly, as shown.
Fit ceiling plate and extension tube.
Note! Extension tube may need
to be shortened, use a pipecutter
to shorten tube, remove all burrs.
Make sure rough end is concealed
in ceiling.
25