Mira Vision Dual Installation Manual page 26

Fit Slide Bar Assembly over Wall
Brackets and secure with screws
supplied. Do not overtighten.
Connect ceiling extension tube.
Feed plastic pipe up through the
slide bar and extension into ceiling.
Do not allow any debris to block the
plastic pipe.
Note! If plastic pipe requires
shortening, make sure there is
enough length to fit elbow (supplied)
or alternative push-fit/compression
fitting (not supplied).
When shortening for use with any
push-fit (e.g. John Guest) fitting,
follow manufacturer's guidelines for
finishing and cleaning the pipe.
Push and twist plastic pipe end until
it "clicks" and locks in place.
Connect plastic pipe in ceiling to
outlet pipe from valve using elbow
supplied. Push all parts together
fully and lock elbow onto pipes
using clips supplied.
Connect elbow to digital mixer
valve. Fit an isolating valve between
to enable easy maintenance. (Pipe
and isolating valve not supplied).
Lock pipe to elbow using clip
supplied. Follow manufacturer's
guidelines for fitting alternative
push-fit connections and flexible
pipework.
26