Genie Z-45/25 Bi-Energy Service Manual page 25

July 2004
Scheduled Maintenance Procedures
Observe and Obey:
Maintenance inspections shall be completed by
a person trained and qualified on the
maintenance of this machine.
Scheduled maintenance inspections shall be
completed daily, quarterly, six months, annually
and every 2 years as specified on the
Maintenance Inspection Report.
Failure to properly complete each
inspection when required may
cause death, serious injury or
substantial machine damage.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating machine.
Keep records on all inspections for three years.
Unless otherwise specified, perform each
procedure with the machine in the following
configuration:
· Machine parked on a firm, level surface
· Boom in the stowed position
· Turntable rotated with the boom between
the non-steer wheels
· Turntable secured with the turntable
rotation lock
· Key switch in the off position with the
key removed
· Wheels chocked
Part No. 106488 Genie Z-45/25 Bi-Energy and Genie Z-45/25J Bi-Energy
Section 3 • Scheduled Maintenance Procedures
About This Section
This section contains detailed procedures for each
scheduled maintenance inspection.
Each procedure includes a description, safety
warnings and step-by-step instructions.
Symbols Legend
Safety alert symbol—used to alert
personnel to potential personal
injury hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Used to indicate the presence of
an imminently hazardous situation
which, if not avoided, will result in
death or serious injury.
Used to indicate the presence of a
potentially hazardous situation
which, if not avoided, could result
in death or serious injury.
With safety alert symbol—used to
indicate the presence of a
potentially hazardous situation
which, if not avoided, may cause
minor or moderate injury.
Without safety alert symbol—used
to indicate the presence of a
potentially hazardous situation
which, if not avoided, may result in
property damage.
Used to indicate operation or
maintenance information.
Indicates that a specific result is expected after
performing a series of steps.
3 - 1