Genie Z-45/25 Bi-Energy Service Manual page 123

July 2004
Observe and Obey:
Troubleshooting and repair procedures shall be
completed by a person trained and qualified on
the repair of this machine.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating the machine.
Before Troubleshooting:
Read, understand and obey the safety rules
and operating instructions printed in the
Genie Z-45/25 Bi-Energy and Genie Z-45/25J
Bi-Energy Operator's Manual.
Be sure that all necessary tools and test
equipment are available and ready for use.
Part No. 106488 Genie Z-45/25 Bi-Energy and Genie Z-45/25J Bi-Energy
Schematics
About This Section
There are two groups of schematics in this section.
An illustration legend precedes each group of
drawings.
Electrical Schematics
Electrocution hazard. Contact with
electrically charged circuits could
result in death or serious injury.
Remove all rings, watches and
other jewelry.
Hydraulic Schematics
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin. Loosen hydraulic
connections very slowly to allow
the oil pressure to dissipate
gradually. Do not allow oil to squirt
or spray.
General Repair Process
Identify
Malfunction
discovered symptoms
problem
still exists
Return to Inspect
service and test
problem
solved
Section 6 • Schematics
Troubleshoot
Perform
repair
6 - 1