Genie Z-45/25 Bi-Energy Service Manual page 115

July 2004
REV A
13 Attach a lifting strap from and overhead crane
or other suitable lifting device to the turntable
rotation assembly.
14 Remove the turntable rotation assembly
mounting fasteners.
15 Carefully remove the turntable rotation
assembly from the machine.
Crushing hazard. The machine
could tip over when the turntable
rotation assembly is removed if
the turntable rotation lock is not in
the locked position.
Crushing hazard. The turntable
rotation assembly could become
unbalanced and fall when
removed from the machine if not
properly supported by the
overhead crane.
Part No. 106488 Genie Z-45/25 Bi-Energy and Genie Z-45/25J Bi-Energy
Section 4 • Repair Procedures
TURNTABLE ROTATION COMPONENTS
4 - 51