Henny Penny LVG-202 Service Manual page 36

5-5. TECH MODE
(CONTINUED)
Aug. 2012
1. To enter the TECH Mode, press and hold
buttons for 5 seconds, until display shows "LEVEL 3"
followed by "ENTER CODE".
2. Enter code 1, 1, 2, 2, 1, 1, 2, 2 (first 2 product buttons).
"A. TECH" & "RESETS" show in the displays.
3. Press ▼ 5 times, and when display shows "F. TECH", press the
√ button
right and T-1 "SOFTWARE" shows in the display, the
first step of the TECH Mode. Use ▲ and ▼ buttons to toggle
through the steps.
Press the right X button twice, at anytime to return to normal
operation.
T-1 - SOFTWARE
• Press to view HP Part No. of eprom
• Press to view software ID
• Press to view software version
T-2 - FRYER TYPE - GAS or ELEC
T-3 - PUSH-BUTTON TEST
Press any of the control buttons to test operation. You should hear a
beep, and the LED should light and/or a display.
T-4 - ALL-ON DISPLAY TEST
Press any of the product buttons and all the LEDs and display
segments should light.
T-5 - SEGMENTS TEST
Press any of the product buttons to view a different segment of the
display characters.
T-6 - DIGITS TEST
Press any of the product buttons numerous times to view all segments
of each digit across the displays.
T-7 - DECIMAL PTS TEST
Press any of the product buttons numerous times to view all decimal
points across the displays.
5-9
Model LVG-202, 203, 204
and
,