FUTABA 10J Instruction Manual page 62

LCD contrast
① Select the "CONTRAST" item and change numerical
value (contrast) by pressing the + key or ‒ key.
＋
Back-light ／ Light-time ／ Light-adjustment
■ Back-light mode
Select the "BACK-LIT" item and
change the mode by pressing the
+ key or ‒ key.
＋
or
● "ALWAYS"：always ON
"OFF"：always OFF
"KEY-ON"：It light on after
Key operation.
Selection range：
ALWAYS, OFF, KEY-ON
Default：ALWAYS
Home display
① Select the "HOME-DSP" item and change the mode
by pressing the + key or ‒ key.
＋
● "Futaba"：Display about a Futaba logo.
"USR-NAME"：Display about a user name.
"DT5/DT6"：Display about the position of DT5
and DT6
"RX BATT"：Display about the receiver battery
voltage
"THR/PIT"：Display about the position of pitch
and throttle.
Battery alarm voltage
① Select the "BATT ALM" item and change the
numerical value (voltage) by pressing the + key or
‒ key.
＋
● AA alkaline batterys ⇒ 4.2V DRY4
● Futaba HT5F1800B ⇒ 5.0V NiMH5
● Futaba FT2F2100B ⇒ 5.8V LiFe2
62
−
or
■ Light-time
Select the "LIT-TIME" item and
change numerical value (time) by
pressing the + key or ‒ key.
− ＋
● It is only a case in "KEY-ON"
mode here.
Selection range：1 ∼ 30(s)
Default：10(s)
● When you want to return the set
value to the initial value, press the
+ key and ‒ key simultaneously.
−
−
or
Selection range：-10 ∼
+10
Default：0
■ Light-adjustment
S e l e c t t h e " L I T - A D J " i t e m
a n d c h a n g e n u m e r i c a l v a l u e
(brightness) by pressing the + key
or ‒ key.
−
or
● It is the brightest at 30.
Selection range：1 ∼ 30
● When you want to return the set
value to the initial value, press the
+ key and ‒ key simultaneously.
Selection range：
Futaba, USR-NAME,DT5/
DT6, RX BATT, THR/PIT(*)
Default：Futaba
*Only Heli mode can be chosen
about THR/PIT.
Selection range：
4.2V 4.6V 5.0V 5.4V 5.8V
6.2V 6.6V 7.0V 7.4V
*The voltage drop of a rechargeable battery
and a dry cell battery is different. When
using a rechargeable battery, always
change the voltage.
＋ −
or
Default：15