FUTABA 10J Instruction Manual page 153

Gyro sensor
GYRO SENS
Function
This function is dedicated mixing for switching
the gyro sensitivity and gyro mode (AVCS/
NORMAL) of Futaba airplane use gyros. Up to 3
axes can be set.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
Activating the function
Gain Channel selection
Switch direction
Gyrotype,
Gain rate
● Select the setting item
with the Jog key.
GYRO SENS
■ Activating the function
① Select the "MIX" item
a n d t h e n s e l e c t t h e
"ON" by pressing the +
key or ‒ key.
● When you do not use a function, set to the
"INH" side.
■ Sensitivity setting channel selection
③ S e l e c t t h e
＋
"CH" item and
t h e n s e l e c t
the sensitivity
setting channel by pressing the + key
or ‒ key.
Range：CH5、CH5/CH7、
CH5/CH8、CH5/CH7/CH8
Default：CH5
WING TYPE
"GYRO SENS"
② Select
from the menu with the
Jog key.
（Gyro type）
● When using a Futaba GYA gyro, select gyro type GY. This switches the gyro sensitivity setting
item to mode and sensitivity direct reading display.
■ Sensitivity switch selection
② Select the "SW" item and then select the
＋ −
or
■ Gyro type and sensitivity setting
④ Press the Jog key and select the sensitivity setting
−
screen you want to set and then set "type" (gyro type)
or
and "rate" (gyro sensitivity) of each channel by pressing
the + key or ‒ key.
（"type"）Range：STD,GY Default：STD
（"rate"）Range：0 ∼ 100% （STD）, NOR100 ∼ 0 ∼
AVC100% （GY） Default：50% （STD）, 0% （GY）
● When you want to return the set value to the initial
value, press the + key and ‒ key simultaneously.
1AIL 2AIL 2AIL+1F 2AIL+2F 2AIL+4F
③ Open the setting screen by
pressing the Jog key.
● When not using this function,
select INH.
Sensitivity switch selection
（C u r r e n t s w i t c h o p e r a t i n g
direction）
● Switches to the sensitivity setting
screen of each switch
direction when the
Jog key is pressed.
（Gyro Gain）
switch by pressing the + key or ‒ key.
＋
or
Range：SwA ∼ SwH、Default：SwA
(GLIDER)
−
153