FUTABA 10J Instruction Manual page 175

④ Swing the selected stick fully
to the left and right (up and
down).
■ THR-REV
This function is not used. When you want to use full throttle with the throttle stick down
and slow with the throttle stick up, select REV. When the stick is up, trim is effective and
when the stick is down, trim is not effective.
*Throttle servo operation reversed by the linkage is usually performed by reverse in the
normal menu. When throttle servo operation is reversed with the THR-REV function, trim
becomes ineffective at slow.
THR-REV
① Turn off the power and then
t u r n o n t h e p o w e r w h i l e
pressing the + key and ‒ key
simultaneously.
＋ −
■ LANGUAGE
The language displayed at proportional can be changed. The initial setting is English, but
can be selected from among 7 languages.
LANGUAGE
① Turn off the power and then
t u r n o n t h e p o w e r w h i l e
pressing the + key and ‒ key
simultaneously.
＋ −
Return from the transmitter setting screen to the normal menu by turning on the power
without pressing a key.
⑤ ■ appears next to "LEFT"
and "RGHT". Press the Jog
key.
② Select THR-REV → NOR
in the menu with the Jog
key.
② Select
LANGUAGE → English in
the menu with the Jog
key.
FUTABA CORPORATION
1080 Yabutsuka, Chosei-mura, Chosei-gun, Chiba-ken, 299-4395, Japan
Phone: +81 475 32 6982, Facsimile: +81 475 32 6983
⑥ W h e n " C O M P L E T E " i s
displayed, adjustment is
complete.
END
③ S e l e c t N O R o r R E V b y
pressing the + key or ‒ key.
Setting is ended by power
off.
−
＋
③ S e l e c t N O R o r R E V b y
pressing the + key or ‒ key.
Setting is ended by power
off.
−
＋
2014, 11 (3)
175