Confirming the Transmission Status During a Multicast (Multicast
Terminal)
1
Press [STATUS].
•
The multicast information screen is displayed.
2
Use [
][
] to select a multicast target and press
[ENTER].
•
The communication status of the selected multicast
target is displayed.
Note
•
When [G] is pressed, the displayed party changes.
•
When automatic adjustment for the multicast tree occurs, the adjusted node IDs are displayed in
"Current" of "Node ID (Set / Current)".
Document Version 2018-01
Using Multicast
1
2
User Manual
181