6.
Click "Start Conference".
•
The sites in the "Dial Out Endpoint List" are dialled out to. The conference starts when the sites
answer.
Operation During a Conference
Changing Screen Layout (Normal Mode Only)
Note
•
To perform this operation, "Screen Layout Switching" in the profile must be set to "Manual". For
details, refer to "Profile Settings".
1.
Click the "Home" screen selecting tab.
•
The Home screen is displayed.
2.
Click the "Conference Operation" tab in the operation area.
•
The conference operation screen is displayed.
3.
Select the screen layout you want to use from the "Screen Layout Switching" drop-down list.
4.
Click "Execute".
•
A dialogue box to confirm the change of the screen layout is displayed.
5.
Click "OK".
•
The screen layout during a conference is changed.
Changing Display Position of Site Images (Normal Mode Only)
Note
•
To perform this operation, "Display Position Switching" in the profile must be set to "Manual". For
details, refer to "Profile Settings".
1.
Click the "Home" screen selecting tab.
•
The Home screen is displayed.
Basic Operation
Operating Instructions
17