Table of Contents
Advertisement
Using Multicast
Press [G].
•
The multicast target screen is displayed.
Note
•
Only IPv4 addresses can be used for the multicast feature.
When "Contact list" is selected
•
The contact list screen is displayed.
Use [
][
•
The multicast target screen is displayed.
Note
•
To continue registering multicast targets, repeat the procedure from step 6.
•
Register multicast targets starting from the lowest available node ID. The node ID of a ""Not
Registered"" target cannot be selected for registration if it is not the lowest available number.
7.
Press [G].
•
A dialogue box to confirm the saving of settings is displayed.
8.
Use [
][
] to select "Yes" and press [ENTER].
•
The multicast tree screen is displayed.
Note
•
To continue registering multicast trees, repeat steps 2–8 of the procedure.
Editing Registered Contents
1.
In step 7 of "Administrator Menu List (Page 136)", select "Multicast Tree Set." and press [ENTER].
•
The multicast tree screen is displayed.
2.
Use [
][
] to select the multicast tree to edit.
3.
Press [B].
•
The multicast tree setting screen is displayed.
4.
Use [
][
] to select the item to edit, and then edit it.
5.
Press [G].
•
A dialogue box to confirm the saving of settings is displayed.
6.
Use [
][
] to select "Yes" and press [ENTER].
•
The multicast tree screen is displayed.
178
User Manual
] to select the other party to register and press [ENTER].
Document Version 2018-01
Advertisement
Table of Contents
