Table of Contents
Advertisement
Recalling a Registered Preset
During a video conference call, you can set your own video camera's direction, zoom and magnifier settings,
etc., to the desired state by selecting a registered preset.
Note
•
For details about compatible video camera models, contact your dealer.
•
You can recall a preset that was set by the other party for the other party's video camera during a video
conference call.
1
Press [CAM CTRL].
•
The site selection dialogue box is displayed.
Note
•
After the site selection dialogue box is displayed,
if no operations are performed within
approximately 10 seconds, the dialogue box will
disappear.
2
Use [
][
] to select "Local Site" and press
[ENTER].
•
The camera control screen is displayed.
3
Press a numeric button (1–9) to select the preset
number that you want to recall.
•
The direction and zoom of your video camera will
change to that of the registered preset.
Document Version 2018-01
Controlling a Video Camera
2
1
3
User Manual
97
Advertisement
Table of Contents
