Fisher & Paykel 635 Active Smart Service Manual page 80

321144
Step 6
Insert the heater back into the pocket with the wires
sticking out backwards.
Step 7
Insert the stainless spring clip under the heater to
ensure contact between the heater and the ice
tube. The bottom loop clips onto the liner plastic,
leaving the double fold above it.
Loop the wires and connectors around the spout.
Step 8
Ensure the wires are well clear of the water outlet
around the spout. Tape the wires against plastic
surfaces in the spout recess to ensure they
cannot fall into the path of the water. This is
important to ensure there is no water splashing,
icing up, or ice cube tainting.
Side view of the finished repair.
Step 9
Check the heater resistance at the module
connection to ensure the heater has been
successfully repaired.
The icemaker assembly can now be reassembled
and the power restored. Check the icemaker
operates as normal by forcing a harvest (refer to
Section 10.1.10).
80