Cables And Power Supplies; Data Cables; Usb Cable; Ethernet Cable - DataCard SD260 Installation And Administrator's Manual

Cables and Power Supplies

The printer uses the following data cables and power supplies.

Data Cables

The data cable connects the printer to the network or directly to a PC. You can use one of the
following data cables:
USB

Ethernet

Use only one type of data cable with a printer. If you need to connect more than one PC to a
printer, use a network connection.

USB Cable

Use a USB data cable, 6 feet (2 meters) long, to connect the printer
to the PC. Be sure to use a cable rated for USB 2.0 data
transmission.

Ethernet Cable

Use a standard Ethernet network cable, also called a Category 5 or Cat 5 cable, to connect the
printer to a network port.
Ethernet cables are not available from Datacard. You can purchase a cable from a
third‐party supplier.

USB Smart Card Cable

Use a USB cable, up to a maximum of 6 feet (2 meters) long, to connect the smart card port to
the PC.

Power Supply

The printer power supply is rated as follows:
Input: 110–240V, 50–60 Hz, 1.5A

Output: 24V, 3.0A, 72W

It is self‐adjusting within the rated input voltage.
SD160/SD260 Installation and Administrator's Guide 75