Engines; Rpm Adjustment; Flex Plate - Genie ZX-135/70 Service And Repair Manual

Service and Repair Manual

Engines

5-1

RPM Adjustment

Refer to Maintenance Procedure in the appropriate
Service or Maintenance Manual for your machine,
Check and Adjust the Engine RPM.
74
5-2

Flex Plate

The flex plate acts as a coupler between the engine
and the pump. It is bolted to the engine flywheel
and has a splined center to drive the pump.
How to Remove the Flex Plate
1 Disconnect the wiring plug at the electronic
displacement controller (EDC), located on the
drive pump.
2 Support the drive pump with an appropriate
lifting device. Then remove all of the pump
mounting plate to engine bell housing bolts.
3 Carefully pull the pump away from the engine
and secure it from moving.
4 Remove the flex plate mounting fasteners,
then remove the flex plate from the engine
flywheel.
ZX®-135/70
April 2018
Part No. 1279835GT