Setting The Default Values For Logo; Clock Settings; Contrast Settings; Start Screen Settings - Siemens Logo! Manual

5.2 Setting the default values for LOGO!

You can set the following default values for LOGO!:

Clock settings

You can set the default values for time-of-day and date,
summertime/wintertime conversion and synchronization
S
in parameter assignment mode by means of the set
menu ("Clock" menu item)
S
in programming mode by means of the setup menu
("Clock" menu item).
Time-of-day and date see Chapter 5.2.1.
Summertime/wintertime conversion see Chapter 3.7.13.
Synchronization see Chapter 3.7.14.

Contrast settings

You can set the default value for the display contrast
S
in parameter assignment mode by means of the set
menu ("Contrast" menu item)
S
in programming mode by means of the setup menu
("Contrast" menu item).
See Chapter 5.2.2.

Start screen settings

You can select the default setting for the start screen
S
in parameter assignment mode by means of the set
menu ("StartScreen" menu item).
See Chapter 5.2.3.
5.2.1 Setting the time-of-day and date
(LOGO! ... C)
You can set the TOD and the date
S
in parameter assignment mode by means of the set
menu ("Clock" menu item)
S
in programming mode by means of the setup menu
("Clock" menu item).
LOGO! Manual
A5E00380835-01
Configuring LOGO!
241