Recycling And Disposal - Siemens Logo! Manual

Warning
!
Risk of personal injury and material damage.
In potentially explosive atmospheres, there is a risk of per-
sonal injury or damage to material if you disconnect con-
nectors when the system is in RUN.
In potentially explosive atmospheres, always switch off the
power supply to LOGO! and its components before you
disconnect any connectors.
LOGO! is issued with the CE Certificate of Conformity. It is
compliant with VDE 0631 and IEC 61131-2 and interfer-
ence-proof to EN 55011, Limit Class B.
Marine certification has been requested.
S
ABS (American Bureau of Shipping)
S
BV (Bureau Veritas)
S
DNV (Det Norske Veritas)
S
GL (Germanischer Lloyd)
S
LRS (Lloyds Register of Shipping)
S
Class NK (Nippon Kaiji Kyokai)
LOGO! is therefore suitable for use both in industry and in
the domestic area.
ID for Australia
Our products carrying the label shown at the side are com-
pliant with AS/NZS 2064:1997 (Class A) standard.

Recycling and Disposal

LOGO! units can be fully recycled, due to their low-pollutant
equipment. Contact a certified electronic waste disposal
center for environmentally acceptable recycling and dis-
posal of your old devices.
LOGO! Manual
A5E00380835-01
Getting started with LOGO!
13