Setting The Default Values For Logo - Siemens LOGO! Manual

5.2

Setting the default values for LOGO!

You can set the following default values for a LOGO! Basic:
Clock settings
You can set the default values for time-of-day and date (Page 222) , summertime/wintertime
conversion (Page 93) and synchronization (Page 96):
● in parameter assignment mode by means of the set menu ("Clock" menu item)
● in programming mode by means of the setup menu ("Clock" menu item).
Contrast and backlight settings
You can set the default values for the display contrast and backlight (Page 223):
● in parameter assignment mode by means of the set menu ("LCD" menu item)
● in programming mode by means of the setup menu ("LCD" menu item).
Menu Language
You can set the language (Page 224) in which the LOGO! menus will be displayed:
● in parameter assignment mode by means of the set menu ("Menu Lang" menu item)
● in programming mode by means of the setup menu ("Menu Lang" menu item)
Number of Base Module Analog Inputs
The LOGO! Base Modules LOGO! 24, LOGO! 24o, LOGO! 24C, LOGO! 24Co, LOGO!
12/24RC and LOGO! 12/24RCo support four analog inputs. Formerly they supported two.
You can choose whether to use two or four analog inputs (Page 225) on these modules:
● in parameter assignment mode by means of the set menu ("BM AI NUM" menu item)
● in programming mode by means of the setup menu ("BM AI NUM" menu item)
Start screen settings
You can select the default setting for the start screen (Page 226) that displays on LOGO!
and the LOGO! TD when LOGO! transitions to RUN mode:
● in parameter assignment mode by means of the set menu ("StartScreen" menu item)
Message Text settings
You can select settings that apply to all message text function blocks (Page 178) from the
Programming menu.
LOGO!
Manual, 10/2017, A5E01248535-AA
Configuring LOGO!
5.2 Setting the default values for LOGO!
221