Input P Configuration - Siemens Logo! Manual

LOGO! functions
Example
This is how tow message texts could be shown:
Motor 5
STOP AT
10:12
!!Action!!
Key
Motor 2
3000
hours
MAINTENANCE!
Press
Mo 09:00
2003-01-27

Input P configuration

To configure the priority and the acknowledgment (pro-
gramming mode):
B33
Priority
00
Quit=Off
1. Increase the priority to 1:
2. Change to 'Quit':
3. Enable 'Quit':
204
Display field of the LOGO! in RUN mode
Example: Message text with
priority 30
Example: Message text with
priority 10
Date and current time-of-day
(only for versions with real-time
clock).
"+" means: The parameters and actual
+
values in an active message text can be
edited
Priority
Status of the acknowledgment
Cursor on '0' +
Press
Press or
LOGO! Manual
A5E00380835-01