Parameters - Siemens Logo! Manual

Configuring LOGO!

5.1.1 Parameters

Note
In the following discourse on parameters, we presume that
the respective default parameter protection mode ("+") has
been maintained. This is prerequisite for viewing and edit-
ing parameter in the parameter assignment mode!
See Chapter 4.3.5 and the example on Page 91.
Parameters are, for example:
S
The delay times of a timer relay.
S
The switching times (cams) of a timer switch.
S
Counter thresholds
S
The monitoring time for hour counters
S
The trigger thresholds.
Each one of the parameters is identified by its block num-
ber (Bx) and the shortname of the parameter. Examples:
S
T:
S
MI:
Note
LOGO!Soft Comfort also allows you to assign names to
blocks (for more information, refer to Chapter 7).
236
...is a configurable time.
...is a configurable time interval.
LOGO! Manual
A5E00380835-01