Safety Guideline; Qualified Personnel; Prescribed Usage; Edition - Siemens Logo! Manual

Safety Guideline

s
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring to property damage only have no safety alert symbol. The notices shown below are graded
according to the degree of danger.
Danger
!
indicates that death or severe personal injury will result if proper precautions are not taken.
Warning
!
indicates that death or severe personal injury may result if proper precautions are not taken.
Caution
!
with a safety alert symbol indicates that minor personal injury can result if proper precautions are not taken.
Caution
without a safety alert symbol indicates that property damage can result if proper precautions are not taken.
Attention
indicates that an unintended result or situation can occur if the corresponding notice is not taken into account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be
used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property
damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning and
operation of a device/system may only be performed by qualified personnel. Within the context of the safety notices
in this documentation qualified persons are defined as persons who are authorized to commission, ground and label
devices, systems and circuits in accordance with established safety practices and standards.

Prescribed Usage

Note the following:
Warning
!
This device and its components may only be used for the applications described in the catalog or the technical
description, and only in connection with devices or components from other manufacturers which have been
approved or recommended by Siemens.
Correct, reliable operation of the product requires proper transport, storage, positioning and assembly as well as
careful operation and maintenance.
Trademarks
All names identified by  are registered trademarks of the Siemens AG. The remaining trademarks in this publica-
tion may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Copyright Siemens AG 2004 All rights reserved
The distribution and duplication of this document or the
utilization and transmission of its contents are not
permitted without express written permission. Offenders
will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model
or design, are reserved
Siemens AG
Automation and Drives
Postfach 4848, D-90327 Nuernberg
Siemens Aktiengesellschaft
Disclaim of Liability
We have reviewed the contents of this publication to ensure
consistency with the hardware and software described. Since
variance cannot be precluded entirely, we cannot guarantee full
consistency. However, the information in this publication is re-
viewed regularly and any necessary corrections are included
in subsequent editions.
Siemens AG 2004
Technical data subject to change.
A5E00380835-01