Ford Mustang 2017 Owner's Manual page 49

Table of Contents

Advertisement

Any further attempts to perform one of the
above sounds the alarm again.
Full and Reduced Guard
Full Guard
Full guard is the standard setting.
In full guard, the interior sensors are on
when you arm the alarm.
Reduced Guard
In reduced guard, the interior sensors are
off when you arm the alarm.
Using the information display controls, scroll to:
Message
Settings
Vehicle settings
Alarm
Ask on exit
Reduced
Note: Selecting reduced guard does not set the alarm permanently to reduced guard. It
sets it to reduced guard only for the current locking cycle.
Arming the Alarm
To arm the alarm, lock your vehicle. See
Doors and Locks (page 37).
Disarming the Alarm
Note: A valid passive key must be located
within the detection range of that door for
keyless entry. See Keyless Entry (page 39).
Mustang (CZG, CZY) Vehicles Built From: 02-05-2016, HR3J 19A321 AKA enGBR, First Printing
Security
Selecting Full or Reduced Guard
You can select full or reduced guard using
the information display. See General
Information (page 64).
Ask on Exit (If Equipped)
You can set the information display to ask
you each time which level of guard you
wish to set.
Action and Description
Press the OK button.
Press the OK button.
Press the OK button.
Press the OK button.
Appears in the information display each time you switch your
vehicle off.
If you wish to arm the alarm with reduced guard, press the
OK button when this message appears.
If you wish to arm the alarm with full guard, leave your vehicle
without pressing the OK button.
Perimeter Alarm
Disarm and silence the alarm by unlocking
the doors and switching your vehicle on or
unlocking the doors with the remote
control.
Category One Alarm
Disarm and silence the alarm by unlocking
the doors and switching your vehicle on
within 12 seconds or unlocking the doors
or the liftgate with the remote control.
45

Advertisement

Table of Contents
loading

Table of Contents