Adjusting The Headlamps - Lhd - Ford Mustang 2017 Owner's Manual

3. Remove the wiper blade.
4. Install in the reverse order.
ADJUSTING THE HEADLAMPS
- LHD
Vertical Aim
Headlamp Aim Target
E142592
A 8 ft (2.4 m).
B Center height of lamp to ground.
C 25 ft (7.6 m).
D Horizontal reference line.
Vertical Aim Adjustment
1. Park your vehicle on a level surface
approximately 7.6 m (25 ft) away from
a vertical wall or screen.
2. Apply the parking brake.
3. Measure the height from the center of
the headlamp to the ground.
Note: There may be an identifying mark on
the lens to help you locate the center of the
headlamp bulb.
4. Mark a horizontal reference line on the
vertical wall or screen that is a
minimum of 2.4 m (8 ft) long.
Mustang (CZG, CZY) Vehicles Built From: 02-05-2016, HR3J 19A321 AKA enGBR, First Printing
Maintenance
5. Switch the low beam headlamps on
and open the hood.
E209825
6. There is a distinct change from light to
dark in the left-hand portion of the
headlamp beam pattern. Position the
top edge of this cut-off 7.5 cm (3 in)
below the horizontal reference line.
E187824
7. To adjust the vertical aim, use a
suitable tool to rotate the adjuster
clockwise or counterclockwise.
Note: To see a clearer light pattern while
adjusting one headlamp, block the light
from the other headlamp.
8. Close the hood and switch the low
beam headlamps off.
Horizontal Aim Adjustment
Horizontal aim should not be required
although it is adjustable.
167