Adjusting The Headlamps - Rhd - Ford Mustang 2017 Owner's Manual

1
E209667
1. Locate the adjuster within the
extension tube attached to the rear of
the headlamp assembly.
2. To adjust the horizontal aim, use a
suitable tool to rotate the adjuster
clockwise or counterclockwise.
Note: X: Toward the front of the vehicle.
Mustang (CZG, CZY) Vehicles Built From: 02-05-2016, HR3J 19A321 AKA enGBR, First Printing
Maintenance
ADJUSTING THE HEADLAMPS
- RHD
X
Vertical Aim
Headlamp Aim Target
E142592
A
B
C
D
Vertical Aim Adjustment
1. Park your vehicle on a level surface
approximately 7.6 m (25 ft) away from
a vertical wall or screen.
2. Apply the parking brake.
3. Measure the height from the center of
the headlamp to the ground.
Note: There may be an identifying mark on
the lens to help you locate the center of the
headlamp bulb.
4. Mark a horizontal reference line on the
vertical wall or screen that is a
minimum of 2.4 m (8 ft) long.
5. Switch the low beam headlamps on
and open the hood.
168
8 ft (2.4 m).
Center height of headlamp to
the ground.
25 ft (7.6 m).
Horizontal reference line.