Ford Mustang 2017 Owner's Manual page 174

WARNINGS
Bulbs become hot when in use. Let
them cool down before you remove
them.
Use the correct specification bulb. See
Bulb Specification Chart (page 173).
The following instructions describe how to
remove the bulbs. Install in the reverse
order unless otherwise stated.
Headlamp
A
E199556
A Headlamp high and low beam.
Front Side Lamp
E159695
1. Remove the three wheel arch liner
fasteners.
Mustang (CZG, CZY) Vehicles Built From: 02-05-2016, HR3J 19A321 AKA enGBR, First Printing
Maintenance
E176616
2. Remove the outermost engine
undershield fastener.
3. Pull the wheel liner back toward the
tire to gain access to the bulb.
4. Remove the bulb holder by pulling it
straight out.
5. Remove the bulb by pulling it straight
out.
Headlamp Low and High Beam
Your vehicle has high intensity discharge
lamps. These lamps operate at a high
voltage. Contact an authorized dealer if
they fail.
Front Direction Indicator
E180889
1. Reposition the wheel arch liner, see
Front Side Lamp.
2. Disconnect the electrical connector.
170