Using Stability Control - Ford Mustang 2017 Owner's Manual

B
A
E72903
A Vehicle without stability control
Button func-
tions
Default at start-
up
Button pressed Traction control
momentarily
Button pressed
twice rapidly
Button pressed
and held more
than five
seconds
Button pressed
again after
deactivation
Mustang (CZG, CZY) Vehicles Built From: 02-05-2016, HR3J 19A321 AKA enGBR, First Printing
Stability Control
B
B
A
B
A
ESC features
Mode
control off
- On during bulb
off
Sport mode (if
equipped)
ESC disabled
ESC fully
enabled
skidding off its intended route.
B Vehicle with stability control
maintaining control on a slippery
surface.

USING STABILITY CONTROL

Electronic Stability Control
The system automatically turns on each
time you switch the ignition on. The
electronic stability control portion of the
system is disabled when the transmission
is in reverse (R) or, on some models, if you
press and hold the electronic stability
control button for more than five seconds
when you apply the brakes and the vehicle
is at a stop. You can switch off the traction
control portion of the system
independently. See Using Traction
Control (page 115).
Stability Electronic
stability
light control
Enabled
check
On Enabled
On Enabled
On Disabled
Off Enabled
117
Traction
control system
Enabled
Disabled
Enabled
Disabled
Enabled