Mpls Basic Configuration Guide, Cisco Ios Xe Everest 16.5.1 (Cisco Asr 900 Series - Cisco ASR 900 Series Manual

MPLS Transport Profile
SUMMARY STEPS
1. enable
2. configure terminal
3. mpls tp
4. psc
5. psc fast refresh interval time-in-msec
6. psc slow refresh interval time-in-msec
7. psc remote refresh interval time-in-sec message-count num
8. exit
9. interface tunnel-tp number
10. psc
11. emulated-lockout
12. working-lsp
13. manual-switch
14. exit
15. exit
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3
mpls tp
Example:
Device(config)# mpls tp
Step 4 psc
Example:
Device(config-mpls-tp)# psc
Step 5
psc fast refresh interval time-in-msec
Configuring MPLS-TP Linear Protection with PSC Support
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Enters Multiprotocol Label Switching (MPLS) Transport Profile
(TP) global mode.
Enables the PSC Protocol.
Configures the fast refresh interval for PSC messages.

MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)

33