Configuring The Router Id And Global Id - Cisco ASR 900 Series Manual

VPLS Configuration over MPLS-TP
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2 configure terminal
Example:
Router# configure terminal
Step 3 mpls label range minimum-value maximum-value{
staticminimum-static-value maximum-static-value}
Example:
Router(config)# mpls label range 1001 1003 static 10000
25000

Configuring the Router ID and Global ID

SUMMARY STEPS
1. enable
2. configure terminal
3. mpls tp
4. router-id node-id
5. global-id num
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2 configure terminal
Example:
Router# configure terminal
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
Configuring the Router ID and Global ID
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Specifies a static range of MPLS labels
109