Cisco ASR 900 Series Manual page 154

Verifying the Co-routed Flex LSP Configuration
PSBs: 2, RSBs: 2, Requests: 0
LSPId: 2
Tunnel Name: rtrA_t2
RSVP Path Info:
InLabel: No intf, No label
Incoming Address: Unknown
Explicit Route:
Strict, 10.10.10.2/32
Strict, 14.14.14.2/32
Strict, 14.14.14.4/32
Strict, 16.16.16.4/32
Strict, 16.16.16.3/32
Strict, 192.168.0.3/32
Record Route: None
Tspec: avg rate=8K, burst=1K, peak rate=8K
Association:
Association Type: Single sided provisioned bidirectional LSPs
Association ID: 100, Source: 1.1.1.1
Extended ID:
Secondary (S): 0, Protecting (P): 0, Notification (N): 0, Operation (O): 0
Link Flags: [PROJECT:ANY], LSP Flags: [1:N PROTECTION EXTRA_TRAFFIC]
Reverse LSP:
Explicit Route:
Tspec: avg rate=4K, burst=1K, peak rate=4K
RSVP Resv Info:
OutLabel: GigabitEthernet0/2/0/2, 16012
FRR OutLabel: No intf, No label
Record Route: None
Fspec: avg rate=8K, burst=1K, peak rate=8K
MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
146
0xc0a80004 (192.168.0.4)
0x2 (0.0.0.2) Protection:
Strict, 17.17.17.3/32
Strict, 17.17.17.4/32
Strict, 14.14.14.4/32
Strict, 14.14.14.2/32
Strict, 11.11.11.2/32
Strict, 11.11.11.1/32
Strict, 192.168.0.1/32
Global source: 0, Extended ID length: 2
Flex LSP Overview